Return to search

Crescimento de filmes finos de ni81fe19 para aplicações envolvendo magnetorresistência anisotrópica / Growth of thin films of ni81fe19 to aplications envolving anisotropic magnetoresistance

Conselho Nacional de Desenvolvimento Científico e Tecnológico / Anisotropic magnetoresistance (AMR) consists in the change of the resistivity of a ferromagnetic metal as a function of the angle between the current and the magnetization, what makes AMR-based sensors promising to measure both angular and linear positions. These devices usually have a structure of Ta/Ni81Fe19/Ta and the thickness of the Ni81Fe19 layer is about 10 nm so as to reduce the demagnetization field parallel to surface. In order to acquire high magnetic field sensitivity (S) and low Barkhausen noise the films should have high AMR values (ΔDR=R) and low coercivity. However, during fabrication, the structures are often exposed to temperatures above 200oC, what changes the characteristics of the interfaces and reduces ΔDR=R. On the other hand, ΔDR=R and S can be remarkably enhanced by insertion of nano-oxide layers that act like difusion barriers on the interfaces. The enhancement is mainly attributed to the large electron specular reflection at the flatter interfaces. In this work we have proposed to verify the possibility of enhance ΔDR=R and S in structures with good thermal stability just by adding an oxidation step after growthing each layer, forming TaOx. We studied the influence of the deposition parameters in the structural and magnetic properties of the samples and otimized the growth of thin films of Ni81Fe19 by magnetron sputtering. We also verified the influence of the annealing in the structural properties of nanostructures of Ta/Ni81Fe19/Ta exposed or not to oxidation on the interfaces. We observed that the TaOx nano-oxide layer can work as expected, however the poor cristalinity of the Ni81Fe19 layers leads to AMR values lower than the literature ones. / Magnetorresistência anisotrópica (AMR) consiste na variação da resistividade de um metal ferromagnético como uma função do ângulo entre a corrente e a magnetização, o que faz com que sensores que utilizam este efeito sejam promissores para medidas de posição tanto angulares quanto lineares. Estes dispositivos normalmente possuem a estrutura Ta/Ni81Fe19/Ta com a espessura da camada de Ni81Fe19 sendo da ordem de 10 nm, para reduzir o campo desmagnetizante paralelo à superfície. Para obter alta sensibilidade (S) e baixos níveis de ruído Barkhausen
os filmes devem apresentar alta variação percentual da AMR (ΔDR=R) e baixa coercividade. Entretanto, durante o processo de fabricação as estruturas frequentemente são expostas à temperaturas maiores que 200oC, o que pode alterar as características das interfaces e reduzir ΔDR=R. Por outro lado, ΔDR=R e S podem ser significativamente incrementados através da inserção de nanocamadas de óxidos que atuam como barreiras contra difusão nas interfaces. O aumento é
atribuído ao maior nível de reflexões eletrônicas especulares nas interfaces mais lisas. Neste trabalho, propomos verificar se é possível aumentar ΔDR=R e S para estruturas com boa estabilidade térmica simplesmente acrescentando uma etapa de oxidação após o crescimento de cada camada, pela formação de TaOx. Estudamos a influência dos parâmetros de deposição nas propriedades estruturais e magnéticas das amostras e otimizamos o crescimento de filmes finos de
Ni81Fe19 pela técnica de magnetron sputtering. Verificamos também a influência do tratamento térmico nas propriedades estruturais de nanoestruturas do tipo Ta/Ni81Fe19/Ta submetidas ou não à oxidação das interfaces. Observamos que a nanocamada de TaOx pode desempenhar o papel esperado, todavia a qualidade cristalina das camadas de Ni81Fe19 acarretou em valores quantitativos de ΔDR=R menores que os encontrados na literatura.

Identiferoai:union.ndltd.org:IBICT/oai:repositorio.ufsm.br:1/9214
Date13 May 2011
CreatorsMori, Thiago José de Almeida
ContributorsDorneles, Lucio Strazzabosco, Flores, Wladimir Hernandez, Piquini, Paulo Cesar
PublisherUniversidade Federal de Santa Maria, Programa de Pós-Graduação em Física, UFSM, BR, Física
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Formatapplication/pdf
Sourcereponame:Repositório Institucional da UFSM, instname:Universidade Federal de Santa Maria, instacron:UFSM
Rightsinfo:eu-repo/semantics/openAccess
Relation100500000006, 400, 500, 500, 300, 300, e5de4f50-b352-48fb-a699-ffab7b7d8f1d, c0458b58-5908-4ffa-994a-9954e3c189fe, ce93c94c-a8da-4407-a680-88457c7ff150, de4211bc-834c-444f-bc76-1fc994b3ea81

Page generated in 0.0027 seconds