This thesis details the design and development of a solid-state, high power modulator for driving plasma ion implantation systems. A plurality of modulators can be stacked in a Marx geometry to allow complete voltage (implantation energy) scalability. Unlike a classic Marx modulator, the design employs actively controlled charging and discharging paths. This allows maximum modulation flexibility and efficiency. A hybrid Marx bank - pulse transformer configuration was commissioned in a 20keV 12A plasma ion implantation system for the purpose of photonics research. <p>The design portion of this work is accompanied by an investigation, extension and discretization of the Lieberman analytical model of plasma ion implantation dynamics. The model predicts final implantation concentrations as well as system operational limits in specific plasma conditions. A new extension to the model accounts for subtle time-of-flight effects on accelerating ions. Agreement between modeled and measured ion currents is good.<p>Finally, a collection of material processing experiments conducted with the plasma ion implantation system since its inauguration in February 2006 is briefly presented. In it, a new silicon-based light emitting diode is introduced.
Identifer | oai:union.ndltd.org:USASK/oai:usask.ca:etd-09152006-112403 |
Date | 18 September 2006 |
Creators | Steenkamp, Casper JT |
Contributors | Moewes, Alexander, Manson, Alan, Hussey, Glenn C., Hirose, Akira, Bradley, Michael P. |
Publisher | University of Saskatchewan |
Source Sets | University of Saskatchewan Library |
Language | English |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | http://library.usask.ca/theses/available/etd-09152006-112403/ |
Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.002 seconds