Return to search

Numerical Analysis of Partial Admission in Axial Turbines

HTML clipboard Numerical analysis of partial admission in axial turbines is performed in this work. Geometrical details of an existing two stage turbine facility with low reaction blades is used for this purpose. For validation of the numerical results, experimental measurements of one partial admission configuration at design point was used. The partial admission turbine with single blockage had unsymmetrical shape; therefore the full annulus of the turbine had to be modeled numerically. The numerical grid included the full annulus geometry together with the disc gaps and rotor shrouds. Importance of various parameters in accurate modeling of the unsteady flow field of partial admission turbines was assessed. Two simpler models were selected to study the effect of accurate modeling of radial distribution of flow parameters. In the first numerical model, the computational grid was two dimensional and the radial distribution of flow parameters was neglected. The second case was three-dimensional and full blades’ span height was modeled but the leakage flows at disc cavity and rotor shroud were neglected. Detailed validation of the results from various computational models with the experimental data showed that modeling of the leakage flow at disc cavities and rotor shroud of partial admission turbines has substantial importance in accuracy of numerical computations. Comparison of the results from two computational models with varying inlet extension showed that modeling of the inlet cone has considerable importance in accuracy of results but with increased computational cost. Partial admission turbine with admission degree of  ε = 0.524 in one blocked arc and two opposing blocked arcs were tested. Results showed that blocking the inlet annulus in one single arc produce better overall efficiency compared to the two blocked arc model. Effect of varying axial gap distance between the first stage stator and rotor rows was also tested numerically for the partial admission turbine with admission degree of  ε = 0.726. Results showed higher efficiency for the reduced axial gap model. Computations showed that the main flow leave the blade path down to the disc cavity and re-enter into the flow channel downstream the blockage, this flow would pass the rotor with very low efficiency. First stage rotor blades are subject to large unsteady forces due to the non-uniform inlet flow. Plotting the unsteady forces of first stage rotor blades for partial admission turbine with single blockage showed that the blades experience large changes in magnitude and direction while traveling along the circumference. Unsteady forces of first stage rotor blades were plotted in frequency domain using Fourier transform. The largest amplitudes caused by partial admission were at first and second multiples of rotational frequency due to the existence of single blockage and change in the force direction. Results obtained from the numerical computations showed that the discs have nonuniform pressure distribution especially in the first stage of partial admission turbines. The axial force of the first rotor wheel was considerably higher when the axial gap distance was reduced between the first stage stator and rotor rows. The commercial codes used in this work are ANSYS ICEM-CFD 11.0 as mesh generator and FLUENT 6.3 as flow solver. / QC20100622

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-12856
Date January 2010
CreatorsBaagherzadeh Hushmandi, Narmin
PublisherKTH, Kraft- och värmeteknologi, Stockholm : KTH
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeDoctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationTrita-KRV, 1100-7990 ; 2010:02

Page generated in 0.0024 seconds