Return to search

Catalytic conversion of syngas to ethanol and higher alcohols over Rh and Cu based catalysts

The thermochemical process converts almost any kind of biomass to a desired final product, i.e. gaseous or liquid transportation fuels and chemicals. The transportation fuels obtained in this way are renewable biofuels, which are alternatives to fossil fuels. During the last few years, thermochemical plants for the production of bioethanol have been launched and another is under construction. A total of about 290 million liters of ethanol are expected to be processed per year, mostly using municipal solid waste. Considerable efforts have been made in order to find a more selective catalyst for the conversion of biomass-derived syngas to ethanol. The thesis is the summary of five publications. The first two publications (Papers I and II) review the state of the art of ethanol and higher alcohols production from biomass, as well as the current status of synthetic fuels production by other processes such as the Fischer-Tropsch synthesis. Paper III analyses the catalytic performance of a mesoporous Rh/MCM-41 (MCM-41 is a hexagonal mesoporous silica) in the synthesis of ethanol which is compared to a typical Rh/SiO2 catalyst. Exhaustive catalytic testing including the addition of water vapor and modifying the hydrogen partial pressure in the syngas feed-stream which, in addition to the catalyst characterization (XRD, BET, XPS, chemisorption, TEM and TPR) before and after the catalytic testing, have allowed concluding that some water vapor can be concentrated in the pores of the Rh/MCM-41 catalyst. The concentration of water-vapor promotes the occurrence of the water gas shift reaction, which in turn induces some secondary reactions that change the product distribution, as compared to results obtained from the typical Rh/SiO2 catalyst. These results have been verified in a wide range of syngas conversion levels (1-68 %) and for different catalyst activation procedures (catalyst reduction at 200 °C, 500 °C and no-reduction) as shown in Paper IV. Finally, similar insights about the use of mesoporous catalyst have been found over a Cu/MCM-41 catalyst, shown in Paper V. Also in Paper V, the effect of metal promoters (Fe and K) has been studied; a noticeable increase of ethanol reaction rate was found over Cu-Fe-K/MCM-41 catalyst as compared to Cu/MCM-41. / <p>QC 20161125</p>

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-196808
Date January 2017
CreatorsLopez Nina, Luis Gagarin
PublisherKTH, Kemisk teknologi, UMSA-Universidad Mayor de San Andrés, Bolivia, Stockholm
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeDoctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationTRITA-CHE-Report, 1654-1081 ; 2017:2

Page generated in 0.0018 seconds