Experimental investigations have evaluated the feasibility of using laser-driven plasma microthrusters for small-thrust, high-specific-impulse space maneuvers, particularly for micro- and nanosatellite missions. Recent work made use of the Mach2 hydromagnetics code for the construction of an adequate computational model of the micro-thruster opera- tion. This thesis expounds on this previous work by extending the computational modeling capabilities, allowing for the determination of plasma plume properties and characteristic performance assessment of the microthruster; this allows for further computational investi- gation of the performance improvements achieved by new design considerations. Two par- ticular design changes are implemented and measured: (i) the simulation of microthruster performance intentionally achieving laser-supported detonation of energetic polymer fuels for higher-thrust capabilities, and (ii) the implementation of an axisymmetric nozzle to improve passive solid-fuel performance. The Mach2 hydromagnetics code with the new performance assessment capabilities was used to examine the performance improvement of these new modes of operation; results of the simulations are presented and then evaluated for their use in the overall design of the plasma microthruster. Laser-supported detona- tion shows a tremendous potential increase in the laser momentum coupling coefficient Cm , and demonstrates a much higher thrust; the axisymmetric nozzle varies with nozzle half-angle and length, but still demonstrates expected nozzle trends and improves the laser momentum coupling coefficient, Cm , by up to 230% for some designs considered.
Identifer | oai:union.ndltd.org:UTENN/oai:trace.tennessee.edu:utk_gradthes-1014 |
Date | 01 December 2009 |
Creators | Thompson, Richard Joel |
Publisher | Trace: Tennessee Research and Creative Exchange |
Source Sets | University of Tennessee Libraries |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | Masters Theses |
Page generated in 0.0015 seconds