This thesis describes technologies developed for nanosatellites at the Space Flight Laboratory. A critical ground station component, the Terminal Node Controller, was upgraded in order to support Generic Nanosatellite Bus and future missions. Sun sensor requirements and operation were reviewed, followed by details of the author's work in executing the acceptance testing on these parts, including thermal shock testing, thermal functional testing, calibration, system level testing and on orbit commissioning. A new calibration test process was developed, along with supporting structure and software to ease the testing process, producing accurate calibration parameters and expected performance results for the sensors. A thermal qualification campaign was completed, demonstrating that sun sensors are capable of functioning with negligible performance degradation after exposure to extreme temperatures. A process for installing the sun sensor pin hole was developed using photolithography. Finally, power subsystem analysis for the NEMO-AM mission is presented.
Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OTU.1807/27338 |
Date | 30 May 2011 |
Creators | Gavigan, Patrick |
Contributors | Zee, Robert E. |
Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
Language | en_ca |
Detected Language | English |
Type | Thesis |
Page generated in 0.6553 seconds