In engineering, materials are often assumed to be homogeneous and isotropic; in actuality, material properties do change with sample direction and location. This variation is due to the anisotropy of the individual grains and their spatial distribution in the material. Currently there is a lack of communication between the design engineer, material scientist, and processor for solving multi-objective/constrained designs. If communication existed between these groups then materials could be designed for applications, instead of the reverse. Microstructure sensitive design introduces a common language, a spectral representation, where both design properties and microstructures are expressed. Using Hill bounds, effective elastic properties are expressed within the spectral representation. For the elastic properties, two FCC materials, copper and nickel, were chosen for computation and to demonstrate how symmetry enters into the methodology. This spectral representation renders properties as hyper-surfaces that translate through a multi-dimensional Fourier space depending on the property value of the hyper-surface. Property closures are generated by condensing the information contained within the multi-dimensional Fourier space into a 2-D representation. This compaction of information is beneficial for a quick determination of property limits for a particular alloy system. The design engineer can now dictate the critical design properties and receive sets of microstructures that satisfy the design objectives.
| Identifer | oai:union.ndltd.org:BGMYU2/oai:scholarsarchive.byu.edu:etd-1093 |
| Date | 31 May 2002 |
| Creators | Henrie, Benjamin L. |
| Publisher | BYU ScholarsArchive |
| Source Sets | Brigham Young University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Theses and Dissertations |
| Rights | http://lib.byu.edu/about/copyright/ |
Page generated in 0.0019 seconds