This thesis describes research on Efficient Discrete Modelling of Axisymmetric Radiating Structures . Investigating the possibilities of surmounting the inherent limitation in the Cartesian rectangular Transmission Line Modelling (TLM) method due to staircase approximation by efficiently implementing the 3D cylindrical TLM mesh led to the development of a numerical model for simulating axisymmetric radiating structures such as cylindrical and conical monopole antennas. Following a brief introduction to the TLM method, potential applications of the method are presented. Cubic and cylindrical TLM models have been implemented in MATLAB and the code has been validated against microwave cavity benchmark problems. The results are compared to analytical results and the results obtained from the use of commercial cubic model (CST) in order to highlight the benefit of using a cylindrical model over its cubic counterpart. A cylindrical TLM mesh has not previously been used in the modelling of axisymmetric 3D radiating structures. In this thesis, it has been applied to the modelling of both cylindrical monopole and the conical monopole. The technique can also be applied to any radiating structure with axisymmetric cylindrical shape. The application of the method also led to the development of a novel conical antenna with periodic slot loading. Prototype antennas have been fabricated and measured to validate the simulated results for the antennas.
Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:689488 |
Date | January 2016 |
Creators | Agunlejika, Oluwafunmilayo |
Publisher | Loughborough University |
Source Sets | Ethos UK |
Detected Language | English |
Type | Electronic Thesis or Dissertation |
Source | https://dspace.lboro.ac.uk/2134/21714 |
Page generated in 0.0223 seconds