Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2006. / This thesis relates to the design and characterization of a 10 kW L-band power combiner consisting
of 8 input ports. The design is implemented in a non-radial planar transmission line
architecture and operates between 1.2 and 1.4 GHz.
Because of the ultra high power requirements for the combiner, special attention is given to the
power handling capabilities of the transmission lines and the other components involved. Simulated
S-parameter models of connector to stripline transitions and a one to four-way junction,
as well as measured S-parameter models of high power terminations are incorporated in the
final design.
A 10 kW combiner was built and measured at low power only due to time constraints and the
limited availability of high power sources. Satisfactory results were obtained in terms of the
graceful degradation of unit amplifiers, port mismatches and power combining efficiency.
Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:sun/oai:scholar.sun.ac.za:10019.1/2690 |
Date | 12 1900 |
Creators | Fourie, Gerhardus Johannes |
Contributors | Van Niekerk, C., Van der Walt, P. W., University of Stellenbosch. Faculty of Engineering. Dept. of Electrical and Electronic Engineering. |
Publisher | Stellenbosch : University of Stellenbosch |
Source Sets | South African National ETD Portal |
Detected Language | English |
Type | Thesis |
Format | 18144022 bytes, application/pdf |
Rights | University of Stellenbosch |
Page generated in 0.0052 seconds