Return to search

Research on electrical performance of differential pair design in package substrate

Differential signaling is suitable for high speed signal transmission due to lower noise induction and higher common-mode noise rejection compared to its single-ended signaling counterpart. However, for a high performance differential transmission-line pair, excellent symmetry and appropriate design for substrate layer stack-up is necessary. Especially for a practical IC package substrate, differential transmission-line pair is inevitable for asymmetry because of considering the locations of IC pads and solderballs. Furthermore, different differential transmission-line pair architectures are also demanded in consideration of limited substrate floorplan space and substrate layer stack-up structures. In this thesis, several differential pairs have been implemented on the conventional 4-layer laminate package substrate. The consequent high frequency performances are measured using vector network analyzer and then compared by converting into mixed-mode S-parameters.

Identiferoai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0718107-013034
Date18 July 2007
CreatorsHuang, Chih-yi
ContributorsChih-wen Kuo, Chih-Pin Hung, Sung-mao Wu, Tzyy-sheng Horng, Ken-huang Lin
PublisherNSYSU
Source SetsNSYSU Electronic Thesis and Dissertation Archive
LanguageCholon
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0718107-013034
Rightsunrestricted, Copyright information available at source archive

Page generated in 0.0018 seconds