The aim of this thesis is the investigation of modeling and optimization particularities of tubular polymerization reactors. The original work is divided in two sections, the first treating a modeling and optimization study of tubular reactors for methyl methacrylate polymerization in solution, and the second, an experimental and theoretical study of L-lactide reactive extrusion. In the first section, reactor simulations in similar operating conditions were performed in order to select a representative kinetic model among the published kinetic models for MMA solution polymerization. Two widely used numerical algorithms, one based on Pontryagin's Minimum Principle and the other a Genetic Algorithm, were compared for an average-complexity optimization problem. The results showed a superior robustness of the Genetic Algorithm for this category of problems. The second part of the thesis deals with the modeling and optimization of L-lactide reactive extrusion. A kinetic model is proposed and its parameters estimated using nonlinear estimation numerical procedures based on experimentally measured data. Reactive extrusion experiments were performed in representative operating conditions. The Llactide/ polylactide flow in the extruder was characterized by simulation using the commercial software LUDOVIC®. The simulated residence time distributions characteristics are used to model the reactive extrusion process of two approaches, an axial dispersion model and a compartment model, based on compartments whose characteristics are deduced from the simulations using LUDOVIC®. The modeling results are in good agreement with the measured data in the same operating conditions.
| Identifer | oai:union.ndltd.org:CCSD/oai:tel.archives-ouvertes.fr:tel-00719401 |
| Date | 17 July 2009 |
| Creators | Banu, Ionut |
| Publisher | Université Claude Bernard - Lyon I |
| Source Sets | CCSD theses-EN-ligne, France |
| Language | English |
| Detected Language | English |
| Type | PhD thesis |
Page generated in 0.0023 seconds