This work focuses on the cooling of diesel engines. Facing heavy constraints such<p>as emissions control or fossil energy management, political leaders are forcing car<p>manufacturers to drastically reduce the fuel consumption of passenger vehicles. For<p>instance, in Europe, this fuel consumption has to reach 120 g CO2 km by 2012, namely 25 % reduction from today's level.<p>Such objectives can only be reached with an optimization of all engines components<p>from injection strategies to power steering. A classical energy balance of an internal<p>combustion engine shows four main losses: enthalpy losses at the exhaust, heat<p>transfer to the cylinder walls, friction losses and external devices driving. An<p>optimized cooling will improve three of them: the heat transfer losses by increasing<p>the cylinder walls temperature, the friction losses by reducing the oil viscosity and<p>the coolant pump power consumption.<p>A model is first built to simulate the engine thermal behavior from the combustion<p>itself to the temperatures of the different engine components. It is composed by two<p>models with different time scales. First, a thermodynamic model computes the in cylinder<p>pressure and temperature as well as the heat flows for each crank angle.<p>These heat flows are the main input parameters for the second model: the nodal<p>one. This last model computes all the engine components temperatures according<p>to the nodal model theory. The cylinder walls temperature is then given back to<p>the thermodynamic model to compute the heat flows.<p>The models are then validated through test bench measurements giving excellent<p>results for both Mean Effective Pressure and fluids (coolant and oil) temperatures.<p>The used engine is a 1.9l displacement turbocharged piston engine equipped with<p>an in-cylinder pressure sensor for the thermodynamic model validation and thermocouples<p>for the nodal model validation.<p>The model is then used to optimize the coolant mass flow rate as a function of<p>the engine temperature level. Simulations have been done for both stationary<p>conditions with effciency improvement up to 7% for specific points (low load, high<p>engine speed) and transient ones with a heating time improvement of about 2000s.<p>This gains are then validated on the test bench showing again good agreement. / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished
| Identifer | oai:union.ndltd.org:ulb.ac.be/oai:dipot.ulb.ac.be:2013/210123 |
| Date | 07 June 2010 |
| Creators | Douxchamps, Pierre-Alexis |
| Contributors | Hendrick, Patrick, Leduc, Bernard, Degrez, Gérard, Van Loocke, Mélanie, Verhelts, Sebastian, Tazerout, Mohand |
| Publisher | Universite Libre de Bruxelles, Université libre de Bruxelles, Faculté des sciences appliquées – Mécanique, Bruxelles |
| Source Sets | Université libre de Bruxelles |
| Language | French |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis, info:ulb-repo/semantics/doctoralThesis, info:ulb-repo/semantics/openurl/vlink-dissertation |
| Format | 1 v. (xviii, 247 p.), No full-text files |
Page generated in 0.0027 seconds