Return to search

Methodologies and Tools for the Design and Optimization of Multi-Standard Radio Receivers

One of the main challenges posed by 4G wireless communication systems is achieving flexible, programmable multi-standard radio transceivers with maximum hardware share amongst different standards at a minimum power consumption. Evaluating the feasibility and performance of different multi-standard/multi-band radio solutions at an early stage, i.e. system level, is key for succeeding in surmounting this challenge. This entails for- mulation of the transceiver budget for several RF architectures and frequency plans with different degrees of hardware sharing. This task is complicated by the fact that transceiver blocks can have different implementations that lead to different performances. The tools that are available for use at present have only analysis capabilities or address only one standard and/or receiver architecture at a time.In the belief that a new approach to this problem is necessary, the work that has led to this thesis proposes a novel methodology that automates the design-space explo- ration of integrated multi-standard wireless radio receivers. This methodology has been implemented in a multi-standard RF Transceiver Architecture Comparison Tool, TACT. TACT helps surmounting many of the challenges faced by RF system designers targeting multi-standard/multi-band radio receivers.The goal of the algorithms TACT is built upon is to find a multi-standard receiver frequency plan and budget that meets or exceeds the specifications of the addressed wire- less standards while keeping the requirements of each of the receiver blocks as relaxed as possible. TACT offers RF engineers a deep insight into the receiver behavior at a very early stage of the design flow. It models the impact of critical circuit non-idealities using a high level of abstraction. This reduces the number of design iterations and, thus, the time-to-market of the solution. The reuse of already available intellectual property (IP) blocks is also considered in TACT, what can result in a significant cost reduction of the receiver implementation. A combination of a behavioural-based cooperative multi-agent optimization and deterministic techniques is proposed.The capabilities of the proposed techniques and developed tool are illustrated through case studies addressing different design challenges the design of multi-standard receivers present.The last part of this thesis is devoted to one of the key blocks of any communica- tions receiver: the analog-to-digital converter. This work focuses on modeling and design methodologies for continuous-time ΔΣ modulators. A method to evaluate the stability margin of continuous-time ΔΣ modulators as a function of the timing uncertainty effects is proposed. / QC 20100907 / RaMSiS

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-9573
Date January 2008
CreatorsRodríguez de Llera González, Delia
PublisherKTH, Elektronik- och datorsystem, ECS, Stockholm : KTH
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeDoctoral thesis, monograph, info:eu-repo/semantics/doctoralThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationTrita-ICT-ECS AVH, 1653-6363 ; 08:11

Page generated in 0.0021 seconds