In this investigation, the fabrication of functionally graded structures of SS316L to Ni-based alloys were studied, using the novel technique 3D plasma metal deposition. Two Ni-based alloys were used, a heat resistance alloy Ni80-20 and the solid-solution strengthened Ni625. Different configurations were analyzed, for the Ni80-20 a hard transition and a smooth transition with a region of 50% SS316L/50% Ni80-20. Regarding the structures with Ni625, a smooth transition configuration and variations in the heat input were applied. The effect of the process parameters on the geometry of the structures and the microstructures was studied. Microstructure examinations were carried out using optical and scanning electron microscopy. In addition, microhardness analysis were made on the interfaces. In general, the smooth transition of both systems showed a gradual change in the properties. The microstructural results for the SS316L (both systems) showed an austenite matrix with δ-phase. For the mixed zone and the Ni80-20 an austenite (γ) matrix with some M7C3 precipitates and laves phase were recognized. The as-built Ni625 microstructure was composed of an austenite (γ) matrix with secondary phases laves and δ-Ni3Nb, and precipitates M7C3. The mixed zone exhibited the same phases but with changes in the morphology.
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:34781 |
| Date | 01 August 2019 |
| Creators | Rodriguez, Johnnatan, Hoefer, Kevin, Haelsig, Andre, Mayr, Peter |
| Publisher | MDPI AG |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/publishedVersion, doc-type:article, info:eu-repo/semantics/article, doc-type:Text |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | 10.3390/met9060620, 2075-4701, 620, 10.3390/met9060620, info:eu-repo/grantAgreement/Deutsche Forschungsgemeinschaft/Open Access Publizieren/392676956/ |
Page generated in 0.0017 seconds