Abstract Carbon nanotubes (CNTs) have extraordinary mechanical and electrical properties. Together with their small dimensions and low density, they are attractive candidates for building blocks in future nanoelectromechanical systems and for many other applications. The extraordinary properties are however only attained by perfectly crystalline CNTs and quickly deteriorate when defects are introduced to the structure. The growth technique affects the crystallinity where in general CNTs grown by arc-discharge are close to perfectly crystalline, while CVD-grown CNTs have large defect densities. Mechanical deformation also affects these properties, even without introducing defects. When CNTs are bent they behave similarly to drinking straws, i.e. they buckle or ripple and their bending stiffness drops abruptly. In this thesis, the mechanical behaviour of individual CNTs and vertically aligned carbon nanofibers (VACNFs) has been studied by performing force measurements inside electron microscopes. Cantilevered CNTs, and VACNFs, were bent using a force sensor, yielding force-deflection curves while their structure was imaged simultaneously. We have found that CNTs grown by arc-discharge have a high enough crystallinity to possess a Young’s modulus close to the ideal value of 1 TPa. CVD-grown CNTs possess a Young’s modulus that is about one order of magnitude smaller, due to their large defect density. The VACNFs are yet another order of magnitude softer as a result of their cup-stacked internal structure. We also found that a high defect density will increase the critical strain for the rippling onset and the relative post-rippling stiffness. Multi-walled CNTs with a small inner diameter are less prone to ripple and have a larger relative post-rippling stiffness. Our findings show large variations in the onset of rippling and the bending stiffness before and after rippling. These variations open up possibilities of tailoring the mechanical properties for specific applications. / Baksidetext Carbon nanotubes (CNTs) have extraordinary mechanical and electrical properties. Together with their small dimensions and low density, they are attractive candidates for building blocks in nanoelectromechanical systems (NEMS), and many other applications. In this thesis the mechanical behaviour of individual CNTs and vertically aligned carbon nanofibers has been studied by performing force measurements inside electron microscopes. We have found that the mechanical behaviour is very sensitive to the defect density and the internal structure of the CNTs. The extraordinary properties are only attained by defect free CNTs and quickly deteriorate if defects are introduced to the structure. Mechanical deformations also alter these properties. Single-walled CNTs behave similarly to drinking straws when bent, i.e. they buckle, while the inner tubes of multi-walled CNTs prevent buckling. Instead a more distributed rippling pattern is created for multi-walled CNTs. Both these deformation behaviours will cause an abrupt drop in the bending stiffness, which is detrimental for many applications. The findings in this work will have implications for the design of future NEMS. / <p>Artikel 2 Image formation mechanisms tidigare som manuskript, nu publicerad: urn:nbn:se:kau:diva-16425 (MÅ 150924)</p>
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kau-32041 |
| Date | January 2014 |
| Creators | Jackman, Henrik |
| Publisher | Karlstads universitet, Institutionen för ingenjörsvetenskap och fysik, Karlstad |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Doctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Karlstad University Studies, 1403-8099 ; 2014:33 |
Page generated in 0.0024 seconds