Return to search

Hydraulstyrning med konfiguration över Bluetooth / Controlling a hydraulic pump with configuration over Bluetooth

Denna rapport omfattar konstruktionen av ett fristående drivkort med tillhörande mobilapplikation för styrning och konfiguration av ett hydraulsystem. Projektets syfte var att på beställaren Bosch Rexroth ABs begäran undersöka om pump control module (PCM) - en del ur det existerande Spider 3 styrsystemet - kunde användas som en fristående modul. Hårdvara med en Bluetoothmodul skapades och kopplades mot PCM för att möjliggöra kommunikation via Bluetooth. En mobilapplikation utvecklades i Android studio för att tillåta konfiguration från en mobil enhet. Mjukvaran i PCM modifierades för att kommunicera med Bluetooth-hårdvaran över CAN och även för att tillåta analog styrning av pumpen via en strömstyrd ingång. De grundläggande kraven för systemet uppfylldes och en fungerande prototyp kunde uppvisas vid projektets slut. Prototypen visade stor potential men saknade dock viss funktionalitet som vore önskvärd hos en kommersiell produkt. / This report encompasses the development of a standalone drive card with an accompanying mobile application for control and configuration of a hydraulic system. The purpose of the project was to - according to an inquiry from the client Bosch Rexroth - investigate whether the pump control module (PCM) from the existing Spider 3 control system could be used as a standalone module. Hardware including a Bluetooth module was assembled and connected to the PCM to allow communication over Bluetooth Low Energy (BLE). A mobile application where developed in Android Studio to allow configuration from a mobile device. The software of the PCM were modified to communicate with the Bluetooth hardware over CAN and also for allowing analog control of the hydraulic pump through a current controlled input.The basic demands for the system were met and a working prototype could be demonstrated at the end of the project. The prototype did show large potential but was lacking some functionality which would be desirable for a commercial product.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:umu-122408
Date January 2016
CreatorsOlofsson, Petter, Utterström, Jimmy
PublisherUmeå universitet, Institutionen för tillämpad fysik och elektronik, Umeå universitet, Institutionen för tillämpad fysik och elektronik
Source SetsDiVA Archive at Upsalla University
LanguageSwedish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0023 seconds