The miniaturization afforded by the integration of microfluidic technologies within lab-on-a-chip devices has greatly enhanced analytical capabilities in several key applications. Microfluidics has been utilized in a wide range of areas including sample preparation and analysis, DNA microarrays, cell detection, as well as environmental monitoring. The use of microfluidics in these applications offer many unique advantages: reduction in the required sample size, reduction in analysis time, lowered cost through batch fabrication, potentially higher throughput and the vision of having such devices used in portable systems.
Nanopore sensors are a relatively new technology capable of detection and analysis with single-molecule sensitivity, and show promise in many applications related to the diagnosis and treatment of many diseases. Recently, some research groups demonstrated the integration of nanopores within microfluidic devices to increase analytical throughput. This thesis describes a methodology for integrating nanopore sensors within microfluidic devices with the aim of enhancing the analytical capabilities required to analyze biomolecular samples.
In this work, the first generation of an integrated nanopore-microfluidic device contained multiple independently addressable microfluidic channels to fabricate an array of nanopore sensors using controlled breakdown (CBD). Next, for the second generation, we added pneumatic microvalves to manipulate electrical and fluidic access through connected microfluidic channels. As a proof-of-concept, single molecules (single- and double-stranded DNA, proteins) were successfully detected in the devices.
It is also demonstrated that inclusion of the microfluidic via (microvia) limited the exposed area of the embedded silicon nitride membrane to the solution. This helped in localizing nanopore formation by confining the electric field to specific regions of the insulating membrane while significantly reducing high frequency noise in the ionic current signal through the reduction of chip capacitance.
The devices highlighted in this thesis were designed and fabricated using soft lithography techniques which are available in most biotechnology laboratories. The core of this thesis is based on two scientific articles (Chapters 3 and 4), which are published in peer-reviewed scientific journals. These chapters are preceded by an introductory chapter and another chapter detailing the experimental setup and the methods used during the course of this study.
| Identifer | oai:union.ndltd.org:uottawa.ca/oai:ruor.uottawa.ca:10393/35829 |
| Date | January 2017 |
| Creators | Tahvildari, Radin |
| Contributors | Godin, Michel, Tabard-Cossa, Vincent |
| Publisher | Université d'Ottawa / University of Ottawa |
| Source Sets | Université d’Ottawa |
| Language | English |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0021 seconds