The purpose of this thesis is to effectively model the time history of the temperature distribution during the selective laser sintering process and use this information to investigate the resulting relative density. The temperature is a critical parameter of the process because it directly effects the overall quality of the part. First, an efficient, affordable, and reliable simulation was developed within the finite element software, Abaqus. Next, the results from the simulations were compared to the experimental results performed by Wang et al. (2016). The FEA model consisted of a 3 layer simulation. Multiple simulations at various laser recipes were conducted using W-Ni-Fe as the powder material. The P/v (laser power/scanning speed) was plotted against the resulting total time above the melting temperature for various simulation. It was concluded that a linear relationship exists between the P/v parameters used in the laser recipe and the resulting time above the melting temperature. The average R2 values for the W-Ni-Fe simulations for layer 1, 2, 3 were 0.962, 0.950, and 0.939, respectively. Additionally, the experimental results from the Wang et al. (2016) study confirmed that a linear relationship is present. Thus, it can be concluded that the P/v parameters used within the laser recipe has a direct relation to the resulting relative density of the SLS part.
Identifer | oai:union.ndltd.org:CALPOLY/oai:digitalcommons.calpoly.edu:theses-2757 |
Date | 01 June 2016 |
Creators | West, Connor M |
Publisher | DigitalCommons@CalPoly |
Source Sets | California Polytechnic State University |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | Master's Theses |
Page generated in 0.0013 seconds