Nitrogen removal technologies can help dairy industries meet their nutrient management needs. This thesis investigated two separate treatment technologies for total ammonia nitrogen (TAN) removal: algae raceway ponds and aerated biofilm reactors. Six 1000- liter algae raceway ponds and four 1000-liter tote tanks, each equipped with 10 sheets of nonwoven geotextile (i.e., thermally bonded or needle-punched) biofilm substrate, were used to treat the effluent from a flush dairy in central coastal California (TAN = 251 mg/L, cBOD5 = 204 mg/L). For the algae raceway ponds (TAN loading rate = 7 - 35 g/m³-day among 7-, 10- and 14-day hydraulic residence times (HRT)), first-order removal rate constants (k) were ~0.2 day⁻¹ in the summer and 0.1 - 0.2 day⁻¹ in the winter. Removal rate constants had no correlations (R² < 0.1) with water temperature, weak to moderate (for 7-day ponds, R² = 0.55) correlations with insolation and weak to no correlations with biomass (i.e. volatile solids) concentration. During the winter, low insolation likely inhibited algal photosynthesis and biological TAN treatment. Ponds with 7-day HRT had distinct absence of nitrate and nitrite compared to 10- and 14-day ponds. Net productivities were ~20 g/m²-day in summer and 9 – 11 g/m²-day in winter; gross productivities were 120 – 160 g/m²-day in summer and 77 – 150 g/m²-day in winter. Productivities had no correlations (R² < 0.1) with water temperature and weak to moderate correlations (for 14-day ponds, net productivity R² = 0.56, gross productivity R² = 0.83) with insolation. Analysis of organic compounds in pond effluent showed dissolved volatile solids (~2300 mg/L) were mostly non-biodegradable (~98% of soluble oxygen demand). Dissolved organic nitrogen concentrations in the pond effluent were ~35 mg/L.
For the aerated biofilm reactors, tanks with needle-punched geotextiles had greater first- order TAN removal rate constants (0.69 day⁻¹) than tanks with thermally bonded geotextiles (0.23 day⁻¹) while operating in batch mode. Needle-punched geotextile reactor also accumulated sludge faster and had higher attached to water column biomass (i.e. volatile solids) ratios (~0.08 g VS/g VS) than thermally bonded geotextile reactor (~0.04 g VS/g VS). Among the four tanks, mass of attached biomass was 150 – 340 g per tank while mass of biomass in the water column was 3290 – 5430 g per tank.
Comparing the two treatment technologies, aerated biofilm reactors (removal = 64 – 77%, k = 0.2 – 0.3 day⁻¹, removal rate = 36 – 43 g-N/m²-day, 16 – 19 g-N/m³-day) had more removal and faster removal rates per square meter of land footprint compared to the algae raceway ponds (removal = 38 – 77%, k = 0.1 – 0.2 day⁻¹, removal rate = 4 – 5 g- N/m²-day, 13 – 17 g-N/m³-day), likely due to direct application of aerators in the reactors.
Identifer | oai:union.ndltd.org:CALPOLY/oai:digitalcommons.calpoly.edu:theses-3721 |
Date | 01 September 2020 |
Creators | Son, Darin |
Publisher | DigitalCommons@CalPoly |
Source Sets | California Polytechnic State University |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | Master's Theses |
Page generated in 0.0021 seconds