This thesis reports the research and industry-related works carried out from the development of a fibre-optic strain sensor system for Civil Engineering applications. A sensor system consists of a number of core components, including the sensing element, interrogation/demodulation, multiplexing, signal processing and hardware equipment. In the process of development, a number of issues have been identified and investigated, which resulted in the improvement of the system performance, as well as the proposal of new techniques for the sensor system. First, an improved demodulation technique for a type of sensor, namely the fibre Fizeau interferometer (FFI), is presented. The technique is based on the improvement of the Fourier transform peak detection method, which suffers severely from the poor resolution and accuracy of finding the sensor cavity length. The improvement over the original method has been compared and verified through simulations and experiments. Second, a simultaneous demodulation technique for multiplexed FFI and fibre Bragg grating (FBG) sensors using the discrete wavelet transform (DWT) is proposed. Third, a multiplexing technique using amplitude-modulated chirped FBGs and the DWT is proposed. These two proposed techniques have been demonstrated experimentally through strain measurements. The strain resolution, crosstalk and limitations are investigated. In addition, simultaneous quasi-static strain and temperature sensing of different metal plates are performed. Fibre-optic sensors have found numerous applications in different areas. In this thesis, the use of FBG sensors in Civil Engineering applications is demonstrated in four experimental studies, including: (i) long-term measurement of drying shrinkage and creep of structural grade concrete; (ii) simultaneous measurement of shrinkage and temperature of reactive powder concrete (RPC) at early-age; (iii) measurement of coefficients of thermal expansion of cement mortar and RPC; and (iv) field-trial on the strain monitoring of the world?s first RPC road bridge. In addition, the experimental and practical issues of using FBG sensors are considered.
| Identifer | oai:union.ndltd.org:ADTP/257372 |
| Date | January 2007 |
| Creators | Wong, Allan Chi-Lun, Electrical Engineering & Telecommunications, Faculty of Engineering, UNSW |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | http://unsworks.unsw.edu.au/copyright, http://unsworks.unsw.edu.au/copyright |
Page generated in 0.0021 seconds