Our motivation for this work is based on the need to monitor the cure and inservice health of composite materials. We describe the continuation of an effort to design a multi-functional fiber optic sensor which can be embedded in polymeric composite laminates for monitoring the degree of cure during its fabrication, as well as internal composite strains occurring post-cure.3 In short, this dual-purpose sensor combines the characteristics of a Fresnel reflectometer with those of the extrinsic Fabry-Perot interferometer. For monitoring cure, a broadband source is used so the output intensity of the sensor is amplitude-modulated as the refractive index of the composite is increased during the polymerization process. Post-cure, a coherent light source is implemented so a. sinusoidal variation of the output signal occurs when strains within the composite cause the sensor output to be phase-modulated. We demonstrate the measurement of refractive index with the Fresnel reflectometer/EFPL and test it as an embedded refractive index monitor. Our experimental results demonstrate that the refractive index of 5-minute epoxy increases by approximately 2 % during the cure process. In addition, the sensor can be used as an interferometer to measure internal composite strains, where the phase difference between consecutive fringe peaks is one-half the wavelength of the source. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/45077 |
| Date | 07 October 2005 |
| Creators | Burford, Mary Kathleen |
| Contributors | Electrical Engineering, Claus, Richard O., Wang, Anbo, Murphy, Kent A. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Thesis, Text |
| Format | xi, 69 leaves, BTD, application/pdf, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | OCLC# 43472865, LD5655.V855_1996.B874.pdf |
Page generated in 0.0026 seconds