Return to search

Evaluation of Compression Testing and Compression Failure Modes of Paperboard : Video analysis of paperboard during short-span compression and the suitability of short- and long-span compression testing of paperboard / Utvärdering av kompressionsbrottmoder och kompressionstestning för kartong : Videoanalys av kartong under kompressionstestning och lämpligheten av två olika kompressionsmetoder

The objectives of the thesis were to find the mechanisms that govern compression failures in paperboard and to find the link between manufacturing process and paperboard properties. The thesis also investigates two different test methods and evaluates how suitable they are for paperboard grades. The materials are several commercial board grades and a set of hand-formed dynamic sheets that are made to mimic the construction of commercial paperboard. The method consists of mounting a stereomicroscope on a short-span compression tester and recording the compression failure on video, long-span compression testing and standard properties testing. The observed failure modes of paperboard under compression were classified into four categories depending on the appearance of the failures. Initiation of failure takes place where the structure is weakest and fiber buckling happens after the initiation, which consists of breaking of fiber-fiber bonds or fiber wall delamination. The compression strength is correlated to density and operations and raw materials that increase the density also increases the compression strength. Short-span compression and Long-span compression are not suitable for testing all kinds of papers; the clamps in short-span give bulky specimens an initial geometrical shape that can affect the given value of compression strength. Long-span compression is only suitable for a limited range of papers, one problem with too thin papers are low wavelength buckling.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kau-27519
Date January 2013
CreatorsSjöstrand, Björn
PublisherKarlstads universitet, Institutionen för ingenjörs- och kemivetenskaper (from 2013), Karlstads universitet, Avdelningen för kemiteknik
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0022 seconds