The development and evaluation of a fuel cell test stand incorporating various methods for controlling the temperature and humidity of fuel cell reactants is described. The test stand is capable of accurately metering gas flows, controlling the temperature and humidity of the gases, and delivering the gases to the fuel cell in a safe manner. Additionally, the test stand can measure the voltage and current produced by the fuel cell during operation. Two test stands were constructed and evaluated, one using steam injection for fuel cell stacks and the other using flash evaporation for individual fuel cells. Both test stands were shown to provide adequate control at the upper end of the design range. The flash evaporation test apparatus was used to investigate the effect of inlet gas humidity on fuel cell performance. The results from this investigation showed that, for a fuel cell and reactant temperature of 75°C, the best performance was achieved with a high relative humidity (90%RH) for the hydrogen and a comparatively low relative humidity (60%) for the air. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/9597 |
| Date | 06 October 2003 |
| Creators | Evans, John P. |
| Contributors | Mechanical Engineering, Ellis, Michael W., Von Spakovsky, Michael R., Nelson, Douglas J. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | John_Evans_Masters_Thesis.pdf |
Page generated in 0.0021 seconds