In the last decade there has been increasing research interest in the value of bio-sourced materials from lignocellulosic biomass. The dissolution of cellulose by ionic liquids (ILs) has led to investigations including the dissolution of cellulose, lignin, and complete biomass samples and the in situ processing of cellulose. Rapid quantitative measurement of cellulose dissolution in ILs is difficult. In this work, Fourier transform infrared spectroscopy (FTIR) spectra of cellulose dissolved in 1-ethyl-3-methylimidazolium acetate ([emim][OAc]) were subjected to partial least squares (PLS) regression to model dissolved cellulose content. PLS regression was used due to the ease in developing predictive models with this technique in addition to linear regression being ineffectual for modeling when applied to potentially thousands of variables. Applying a normalization data treatment, before regression, generated a model that estimated cellulose content within 0.533 wt%. The methods described provided the basis for a rapid methodology to determine dissolved cellulose content.
Development of rapid and facile screening techniques to determine the effectiveness of various ILs as solvents for cellulose or lignin will aid in the development of lignocellulosic based bioproducts. In this work, optical microscopy with and without the use of cross-polarized lenses, was used to monitor cellulose and lignin dissolution in two imidazolium-based and two phosphonium-based ILs as well as n,n-dimethylacetamide/lithium chloride (DMAc/LiCl), demonstrating that this technique could be applied more broadly than solely for ILs. The described optical microscopy methodology was more rapid and sensitive than more traditional techniques, such as visual inspection.
The viscosity of [emim][OAc] (162 cP) is 100 times that of water at 20°C and could inhibit its use as a solvent for cellulose. There is a need for simple, low-cost and environmentally benign methods to reduce the viscosity of ILs to aid in cellulose dissolution. In this work, 4 wt% cellulose dissolved in [emim][OAc] was subjected to 50 psi CO2 and 20 psi N2, as a control environment, at both 50°C and 75°C. After 24 hours a nearly 2-fold increase in dissolved cellulose over the N2 control was demonstrated through the application of a 50 psi CO2 environment for cellulose dissolution in [emim][OAc] at 50°C. / Thesis (Master, Chemical Engineering) -- Queen's University, 2011-05-25 22:58:17.744
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OKQ.1974/6524 |
| Date | 26 May 2011 |
| Creators | FitzPatrick, Michael |
| Contributors | Queen's University (Kingston, Ont.). Theses (Queen's University (Kingston, Ont.)) |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English, English |
| Detected Language | English |
| Type | Thesis |
| Rights | This publication is made available by the authority of the copyright owner solely for the purpose of private study and research and may not be copied or reproduced except as permitted by the copyright laws without written authority from the copyright owner. |
| Relation | Canadian theses |
Page generated in 0.0022 seconds