Return to search

Characterization of Thermo-Fluid Transport Properties of Coated and Uncoated Open-Cell Metal Foam Monoliths

An improved steady-state method combining experiment and mathematical modelling has been developed to characterize the scalable convective heat transfer coefficient, hvol [W*m^(-3)*K^(-1)], of uncoated and catalyst-support coated aluminium foam monoliths. The values of hvol were recovered by parameter fitting its model values to experimental temperature data for steady-state air-cooled monoliths under a known heating flux. The model was built with experimentally recovered values of the monolith’s thermal conductivity and fluid permeability along with known values for other physical parameters. The volumetric heat transfer coefficients of 10, 20 and 40 pore-per-inch uncoated aluminium foams were determined to range between 2,700 and 20,000 W*m^(-3)*K^(-1) at channel Reynolds numbers between 85 and 1,700. The presence of a 76 micron thick anodized layer of catalyst support on monolith foams effected a small but significant reduction in the value of hvol. Coating with an anodized layer also reduced the permeabilities of the monoliths to air flow by 4-20%. Knowledge of the scalable parameter, hvol, was used to model a steady-state non-isothermal, non-isobaric heat-coupled methanol reformer. The model shows that changes to the convective transfer coefficient due to coating the monolith with catalyst support may have significant consequences for the thermal profile of the model reactor and for the product yield. / Thesis (Master, Chemical Engineering) -- Queen's University, 2011-12-12 20:11:18.046

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:OKQ.1974/6904
Date13 December 2011
CreatorsTHOMAS, EDWARD ANTHONY
ContributorsQueen's University (Kingston, Ont.). Theses (Queen's University (Kingston, Ont.))
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
LanguageEnglish, English
Detected LanguageEnglish
TypeThesis
RightsThis publication is made available by the authority of the copyright owner solely for the purpose of private study and research and may not be copied or reproduced except as permitted by the copyright laws without written authority from the copyright owner.
RelationCanadian theses

Page generated in 0.0018 seconds