Return to search

Design of an electric motor (PMSM) & manufacturing lab

The thesis presents deals with the design, analysis, test and control of permanent magnetsynchronous motor(PMSM). An analytical model was carried out based on the d-q frame and the equivalent circuit of PMSM, theanalytical model gives an approximation value of the machine parameters and is carried out byequations from the listed references. this phase includes many iteration steps, once the results wereobtained they were compared with the motor specifications and if they don’t match the requiredspecifications the process must be done again until the desired design is obtained. Once the analytical model is obtained a Finite Element Simulation was carried out using FEMMsoftware to validate the design, in this phase the designed machine in the analytical model isanalyzed and validated, once the simulation is done the results from both models are compared anddiscussed in the results chapter. It’s important to mark that during the design phase some design parameters were affected andlimited by some factors, for example, the air gap length has been magnified due to manufacturinglimits. The manufacturing process and the prototype building have been started once the optimal designwas selected, the manufacturing process was explained and a comparison study was made to selectthe best manufacturing process suitable and available for this thesis.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:his-20118
Date January 2021
CreatorsAwawda, Lama
PublisherHögskolan i Skövde, Institutionen för ingenjörsvetenskap
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0022 seconds