Return to search

Sulfur dispersing agents for nickel sulfide leaching above the melting point of sulfur

The effects of sulfur dispersing agents (SDAs) in the oxygen pressure leaching of nickel concentrate at medium temperature were investigated. Liquid sulfur-aqueous solution interfacial tensions and liquid sulfur-sulfide mineral contact angles were measured at 140ºC, 690 kPa overpressure by nitrogen, and 1.0 mol/L NiSO₄. The effects of SDAs including lignosulfonate, Quebracho, o-phenylenediamine (OPD), and humic acid were evaluated by the calculation of the work of adhesion in the liquid sulfur-sulfide mineral-aqueous solution systems. It was found that the sulfide mineral surface is sulfophobic at pH from 4.1 to 4.5 due to the hydrolysis of nickel (II) ions to nickel hydroxide and the deposition of nickel hydroxide on the mineral surface. These findings apply to four different sulfide mineral systems, including pentlandite, nickeliferous pyrrhotite, pyrrhotite, and chalcopyrite. Lignosulfonate, Quebracho, and humic acid were found to significantly reduce the work of adhesion indicating they should be effective SDAs. OPD is ineffective in changing the work of adhesion of sulfur on the mineral sulfides indicating that it is not a good candidate for sulfur dispersion.

The adsorption behavior of SDAs, including lignosulfonate, Quebracho, OPD, and humic acid on elemental sulfur and on nickel sulfide concentrate was investigated. Lignosulfonate, Quebracho, and humic acid were characterized by their infrared spectra. The charge changes on elemental sulfur surface were characterized by the measurement of the electrokinetic sonic amplitude (ESA) in the absence or presence of SDAs. The adsorption of lignosulfonate on molten sulfur surface was calculated by the Gibbs Equation. The adsorption of lignosulfonate, Quebracho, and humic acid on the nickel concentrate was investigated at ambient temperature. The adsorption of lignosulfonate, Quebracho, and humic acid on the nickel concentrate was found to be monolayer adsorption, which was fitted to the Langmuir adsorption isotherm. Electrostatic interaction and ion-binding are the possible mechanisms for the adsorption of lignosulfonate and humic acid on the nickel concentrate. Quebracho is adsorbed on the nickel concentrate through hydroxyl and sulfonate groups. OPD cannot adsorb on the molten sulfur surface. OPD undergoes chemical change in aqueous solution in the presence of ferric at ambient temperature.

Oxygen pressure leaching experiments were performed at 140 or 150ºC under 690 kPa oxygen overpressure. The particle size of the nickel concentrate was found to be an important factor in leaching. During the leaching of nickel concentrate with P₈₀ of 48 µm, the SDAs were believed to be fully degraded before nickel was fully extracted. At most 66% nickel was extracted in the presence of 20 kg/t OPD. Fine grinding (P₈₀ of 10 µm) was sufficient for 99% nickel recovery at low pulp density while at high pulp density, the nickel extraction increased from 95% to 99% with addition of SDAs. Based on the leaching results on a nickel concentrate sample (-44 µm), OPD had the effect of increasing the nickel extraction to about 99%, followed by Quebracho (83%), lignosulfonate (72%), and humic acid (61%). It is suggested that the oxidation product of OPD is effective in solving the sulfur wetting problem in leaching. 97% nickel was recovered in the presence of 5 g/L chloride ion. Chloride ion has an effect to enhance the performance of lignosulfonate under leaching conditions.

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:BVAU./3427
Date05 1900
CreatorsTong, Libin
PublisherUniversity of British Columbia
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
LanguageEnglish
Detected LanguageEnglish
TypeElectronic Thesis or Dissertation
Format5704552 bytes, application/pdf

Page generated in 0.002 seconds