Return to search

Design a MIMO printed dipole antenna for 5G sub-band applications

Yes / In this paper, a planar multiple input, multiple output (MIMO) dipole antenna for a future sub-6 GHz 5G application is proposed. The planar MIMO structure consists of 4 antenna elements with an overall size of 150×82×1 mm3. The single antenna element is characterized by a size of 32.5×33.7×1 mm3 printed on an FR-4 dielectric substrate with εr=4.4 and tanδ=0.02. The suggested antenna structure exhibits good impedance bandwidth equal to 3.24 GHz starting from 3.3 to 6.6 GHz with an S11 value of less than -10 dB (S11≤-10 dB) with antenna gain varying from 5.2 up to
7.05 dB in the entire band, which covers all the sub-6 GHz frequency band
of the 5G application. Good isolation is achieved between the MIMO elements due to low surface waves inside the MIMO antenna substrate. The radiation of the MIMO antenna structure can be manipulated and many beam-types can be achieved as desired. The high-frequency structure simulator (HFSS) software package is used to design and simulate the proposed structure, while the CST MWS is used to validate the results.

Identiferoai:union.ndltd.org:BRADFORD/oai:bradscholars.brad.ac.uk:10454/19237
Date05 November 2022
CreatorsNajim, H.S., Mosleh, M.F., Abd-Alhameed, Raed
PublisherIndonesian
Source SetsBradford Scholars
LanguageEnglish
Detected LanguageEnglish
TypeArticle, Published version
RightsThis is an open access article under the CC BY-SA license (https://creativecommons.org/licenses/by-sa/4.0/), CC-BY-SA

Page generated in 0.0019 seconds