Master of Science / Grain Science and Industry / Sajid Alavi / The U.S. pet food market was approximately worth $22 billion in 2013. Further growth is predicted at a pace faster than most major human food product categories. More than 60% of pet food products are processed using extrusion, and a significant proportion is produced using baking. However, research is lacking on fundamental process and product differences between extrusion and baking. The current study focuses on this aspect and also in-depth characterization of process and product quality. Three iso-nutritional diets were formulated for dry expanded dog food using 0%, 7% and 15% fresh meat inclusion. Major variations between diets were inclusion rates of mechanically deboned chicken, cereal grains, and poultry fat. Each diet was processed with a single screw extruder using various thermal and/or mechanical energy inputs (obtained by varying pre-conditioner stem injection and/or extruder screw speeds). Diets were also processed by baking using a 30 foot experimental oven at 425°F, although the fresh meat inclusion was at 0%, 10% and 20% levels. Proximate analysis of products was conducted. Products were also characterized for physico-chemical properties such as bulk density, piece density, expansion ratio, degree of gelatinization and textural attributes. As fresh meat inclusion increased (0–15%), expansion ratio (4.1–3.5) decreased irrespective of extrusion treatment. Expansion was not evident in the baked kibbles, and bulk and piece densities were up to 56% higher for baked versus extruded kibbles. Textural analysis of extruded kibbles revealed serrated force-deformation response, typical of cellular products, with peak hardness of 2.9–1.5 kgf. On the other hand, baked products had a ‘smooth’ force-deformation response with higher peak hardness than extruded products (up to 3 kgf). Microbial counts for baked products were higher than extruded products, and rancidity profiles as obtained from gas chromatography also had marked differences. The extrusion process was characterized by detailed mass and energy balance analyses, and compared with baking that lacks mechanical energy input. Results from this study provide a useful bench-mark for dry expanded pet food product quality and commonly used processing technologies.
Identifer | oai:union.ndltd.org:KSU/oai:krex.k-state.edu:2097/20410 |
Date | January 1900 |
Creators | Gibson, Michael W. |
Publisher | Kansas State University |
Source Sets | K-State Research Exchange |
Language | en_US |
Detected Language | English |
Type | Thesis |
Page generated in 0.6392 seconds