This thesis deals with optimization of production of "Hold-down hinge hook" component, developed from difficult-to-cut titanium alloy Ti-6Al-4V. This work is focused on the material properties of the component, current research and optimization in titanium machinability sphere. Further it contains a part dedicated to the latest trends in development of cutting tools for machining of titanium alloys. This knowledge is furthermore used for the component production optimization in Frencken Brno s.r.o. company. This project continues with analysis of the component‘s current production technology and designs the way of elimination of production bottleneck. This change is presented by component‘s clamp jig, which decreases higher percentage of scrap due to the geometric complexity. This thesis further contains drawing and technological documentation needed for implementation of the improvement suggestions into the production. There was designed a new NC program. This project is accomplished with technical-economical evaluation.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228816 |
| Date | January 2009 |
| Creators | Filipčík, Jiří |
| Contributors | Zouhar, Jan, Píška, Miroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0941 seconds