Return to search

Modelling of multiphase multicomponent chemically reacting flows through packed beds

Currently used rocket propellants such as hydrazine, monomethylhydrazine, unsymmetrical dimethylhydrazine and nitrogen tetroxide are carcinogenic and toxic to the environment and therefore special protective measures are required when producing, transporting, storing and handling them. Employing alternatives could possibly save costs and this has revived the research interest in so called green propellants. Hydrogen peroxide is such a possible alternative. It requires a catalyst bed to decompose the liquid peroxide into steam and oxygen. The purpose of this work is to design numerical tools that describe the processes in the catalyst bed and subsequently employ these tools to predict the performance of the catalyst bed and investigate the influence of design choices on the performance. In contrast to the models described in the literature, the tools developed in this thesis are two fluid models. In order to test the reliability of the tools results are compared with experimental data. A single control volume two-fluid model has been developed to investigate the pressure drop over the catalyst bed and the influence of the shape and size of catalyst pellets on the pressure drop. Parametric studies with this model revealed that the Tallmadge equation gives a better prediction of the pressure gradient than the more traditionally employed Ergun equation. It was also found that for a given bed length cylindrical pellets with a diameter to length ratio of 2 or more give a lower pressure drop than cylindrical pellets, while achieving the same level of decomposition. A one-dimensional two-fluid model has been developed to obtain longitudinal variations of fluid properties. This model revealed that the catalyst bed can be divided into 3 sections: a pre-boiling region, rapid conversion region and a dry-out region. It was shown that most of the mass transfer takes place due to evaporation. A sensitivity analysis showed that the gas-liquid interfacial area hardly influences the results.

Identiferoai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:581546
Date January 2013
CreatorsKoopmans, Robert-Jan
ContributorsRoberts, Graham
PublisherUniversity of Southampton
Source SetsEthos UK
Detected LanguageEnglish
TypeElectronic Thesis or Dissertation
Sourcehttps://eprints.soton.ac.uk/355889/

Page generated in 0.0018 seconds