The validity of transfer matrix method (TMM) employed in a nonlinear gear cam system is studied in this thesis. The nonlinear dynamic responses of each part in the nonlinear system are estimated by applying the 4th-order Runge-Kutta method. A high speed gear cam drive automatic die cutter was analyzed in this study. A 25 horsepower AC induction motor is designed to drive the system. To complete the cutting work, a sequential process of the harmonic motion and the intermittent motion are generated by the elbow mechanism and the gear cam mechanism, respectively. A simplified branched multi-rotor system is modeled to approximate the motion of the system. The variation of the dynamic parameters of the system in a loading cycle is estimated under a branched torsional system. The Holzer¡¦s transfer matrix method is used to study the variation of the system parameters during the intermittent movement. Moreover, the effect of time-varied speed introduced from the torque variation of the induction motor and gear cam mechanism on the nonlinear dynamic response of the system has also been investigated. To explore the dynamic effect of different cam designs, three different cam motion curves and seven operating rates have been analyzed in this work. The residual vibration of the last sprocket has also been discussed. Numerical results indicate that the proposed model is available to simulate the dynamic responses of a nonlinear gear cam drive system.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0727109-174532 |
| Date | 27 July 2009 |
| Creators | Yen, Chia-tse |
| Contributors | Bo-wen Huang, Ying-chien Tsai, Der-min Tsay, Jao-hwa Kuang, Shyh-chour Huang |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0727109-174532 |
| Rights | withheld, Copyright information available at source archive |
Page generated in 0.0021 seconds