Return to search

Construction of FPGA-based Test Bench for QAM Modulators

In todays fast evolving mobile communications the requirements of higher datarates are continuously increasing, pushing operators to upgrade the backhaul to support these speeds. A cost eective way of doing this is by using microwave links between base stations, but as the requirements of data rates increase, the capacity of the microwave links must be increased. This thesis was part of a funded research project with the objective of developing the next generation high speed microwave links for the E-band. In the research project there was a need for a testing system that was able to generate a series of test signals with selectable QAM modulations and adjustable properties to be able to measure and evaluate hardware within the research project. The developed system was designed in a digital domain using an FPGA platform from Altera, and had the ability of selecting several types of modulations and changing the properties of the output signals as requested. By using simulation in several steps and measurements of the complete system the functionality was verified and the system was delivered to the research project successfully. The developed system can be used to test several dierent modulators in other projects as well and is easily extended to provide further properties.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:liu-62243
Date January 2010
CreatorsHederström, Josef
PublisherLinköpings universitet, Elektroniska komponenter
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeStudent thesis, info:eu-repo/semantics/masterThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess

Page generated in 0.0018 seconds