The primary objective of this research is to formulate a methodology of assessing the maximum impact loading condition that will incur onto an aircraft’s landing gear system via Finite Element Analysis (FEA) and appropriately determining its corresponding structural and impact responses to minimize potential design failures during hard landing (abnormal impact) and shock absorption testing. Both static and dynamic loading condition were closely analyzed, compared, and derived through the Federal Aviation Administration’s (FAA) airworthiness regulations and empirical testing data.
In this research, a nonlinear transient dynamic analysis is developed and established via NASTRAN advanced nonlinear finite element model (FEM) to simulate the worst-case loading condition. Under the appropriate loading analysis, the eye-bar and contact patch region theory were then utilized to simulate the tire and nose wheel interface more accurately. The open geometry of the nose landing gear was also optimized to minimize the effect of stress concentration. The result of this research is conformed to the FAA’s regulations and bound to have an impact on the design and development of small and large aircraft’s landing gear for both near and distant future.
Identifer | oai:union.ndltd.org:unf.edu/oai:digitalcommons.unf.edu:etd-1949 |
Date | 01 January 2019 |
Creators | Tran, Tuan H |
Publisher | UNF Digital Commons |
Source Sets | University of North Florida |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | UNF Graduate Theses and Dissertations |
Page generated in 0.0018 seconds