Return to search

Performance Comparison of Selective Rake Receivers with CLEAN Algorithms in UWB Systems

The Ultra-Wideband (UWB) channel is a dense multipath channel. The system performance and design complexity issues of selective-Rake receiver (SRake) are studied. Rake receiver has difficulties achieving desired system performance in the dense multipath environment. The main ideas of SRake receiver are to obtain the SNR level on known multipath channel and determine the desired number of Rake fingers. In the implementation of the SRake, the CLEAN algorithm is used in selecting the paths with relatively high energy. We can improve the performance of SRake receiver by increasing the accuracy of path selection. By the property of local maximum peak within the smaller partition, Two-Stage CLEAN algorithm acquires the more accurate delay time of multipath. In order to mitigate the sidelobe effect and noise interference, the key assumption in the Deng¡¦s Modified CLEAN algorithm is that using average amplitude around the considered data change as the criterion to determine if the data value is a true path. In this thesis, we investigate CLEAN, Two-Stage CLEAN and Deng¡¦s Modified CLEAN algorithm in three different systems including UWB-Impulse Radio, Pulse Radar and DS-UWB. From the performance comparison, it can be seen that the Two-Stage CLEAN algorithm that has the highest accuracy of path selection in UWB system.

Identiferoai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0726106-175157
Date26 July 2006
CreatorsYang, Siang-Yu
ContributorsJiann-Der Lee, Miin-Jong Hao, Tsung-Cheng Wu, Chin-Der Wann
PublisherNSYSU
Source SetsNSYSU Electronic Thesis and Dissertation Archive
LanguageCholon
Detected LanguageEnglish
Typetext
Formatapplication/pdf
Sourcehttp://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0726106-175157
Rightsnot_available, Copyright information available at source archive

Page generated in 0.0014 seconds