Return to search

Návrh technologie výroby vodícího táhla / Proposal of production technology of uni-axial rod

The thesis is focused on the proposal of production of a stamped part of the uni-axial rod located in the axle of the truck. The uni-axial rod is made of materiál S420MC with thicknes of 4 mm and the planned series production is 84 000 pieces per year for 7 years. The most difficult point for production is a collar, which create support of the bushing. It is not posibble to produce a required height with conventional one-stage process, which was experimentally verified. In the programm PAM-STAMP there was designed multiple-stage process of the production with the use of numerical simulation. The progressive die was designed for this process of the production. Maximal load of a forming press is 5 057 kN. Production will be located on the forming press Kaiser 8000-50-F5-RKM by ANDRITZ Metals. Maximum force of the forming press is 8 000 kN.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:416625
Date January 2020
CreatorsZejda, Václav
ContributorsPeterková, Eva, Řiháček, Jan
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0018 seconds