Return to search

Vibration caused by sheet pile driving- effect of driving equipment

In many construction works in urban areas vibratory driving is the most widely used technique toinstall sheet piles. But due to vibration-sensitive equipment and structures the amount of inducedground vibration need to be minimized. Hence, it is important to select appropriate vibratorparameters that will minimize the level of induced ground vibration.The main objective of this thesis is to study the effect of the vibratory parameter eccentricmoment (vibrator displacement amplitude) on the induced ground vibration during sheet piledriving. To achieve the objective, a literature review and a full-scale field test has beenconducted. The literature review was conducted to provide guidance for the evaluation of thefield test results.The field study was performed in Uppsala in June 2018, where a series of six sheet pile drivingtests were conducted, the first three sheet piles were driven with lower vibrator displacementamplitude and the next three with higher vibrator displacement amplitude, but the same drivingfrequency was used for all six sheet piles. Five tri-axial accelerometers were used to measure thevibration amplitude on vibrator, sheet pile and ground.Important findings of the field study confirmed that, driving sheet piles with higher eccentricmoment will induce lower ground vibration and higher sheet pile penetration speed incomparison to driving with lower eccentric moment. Limitations and possible future researchworks are pointed out. / I många byggnadsarbeten i tätorter är vibrerade drivning den mest använda tekniken för attinstallera sponter. Men på grund av vibrationskänslig utrustning och konstruktioner måstemängden inducerad markvibration minimeras. Därför är det viktigt att välja lämpligavibratorparametrar som minimerar graden av inducerad markvibration.Huvudsyftet med detta examensarbete är att studera effekten av vibrationsparameternsexcentriskamoment (vibratorförskjutningsamplituden) på den inducerade markvibrationen underspontdrivning. För att uppnå målet har en litteraturöversikt och en fullskalig fältundersökning utförts. Litteraturstudien genomfördes för att ge underlag för utvärderingen av fältundersökningenresultanten.Fältstudien utfördes i Uppsala i juni 2018, där en serie av sex spontdrivnings test utfördes, deförsta tre sponten kördes med lägre vibrator-förskjutningsamplitud och de närmaste tre medhögre vibrator-förskjutningsamplitud, men samma körfrekvens användes för alla sex sponter.Fem treaxiala accelerometrar användes för att mäta vibrationsamplituden på vibratorn, spontenoch jorden.Slutsatserna från fältstudien bekräftade att körsponter med högre excentriskt moment kommer attinducera lägre vibrationer och högre penetrationshastighet för sponten i jämförelse med körningmed lägre excentriskt moment. Begränsningar och möjliga framtida forskningsarbeten påpekas.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-239138
Date January 2018
CreatorsTsegay, Haftom Tesfay
PublisherKTH, Jord- och bergmekanik
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageSwedish
TypeStudent thesis, info:eu-repo/semantics/bachelorThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationEES Examensarbete / Master Thesis, TRITA-ABE-MBT ; 18489

Page generated in 0.0023 seconds