The development of a new N-Line model, which provides a practical tool for simulating regional beach changes induced by short and long-term processes, is described in this thesis. The new N-Line model consists of four main modules that together describe the hydrodynamic and morphological responses. The four constituent modules have been integrated based on a wide range of research including the utility and function of commercial or freeware models. They are RCPWAVE wave module, time-averaged and depth-integrated current module, sediment transport module based on Bailard (1981) and contour change morphological module. Two different time-scales and two staggered grid systems for hydrodynamic and morphological simulations were adopted alternatively. For short-term 2D profile changes, new N-Line model applicability has been examined using data from the laboratory to the field. For ideal beaches, new N-Line can simulate an offshore storm bar generation or an onshore accretion due to high or low energy waves. For SUPERTANK large-scale flume data, the predicted profile matched the measured profile well, especially the bar height and position. For beach profile data from the Gold Coast, storm-induced variations of barred profiles were reasonably modelled. The new N-Line model compared well with other commonly used cross-shore models such as SBEACH and UNIBEST. A new schematisation for a non-monotonic profile and DUNED inclusion were introduced. Sensitivity tests on cross-shore sediment coefficient (Kq), smoothing parameter (??s) and water level fluctuations were performed. For long-term 3D beach changes, the new N-Line model applicability has been tested with various boundary conditions using idealized and real field data. Two periods, 17 and 16 months, of beach changes before and after a major bypass plant commenced operation in 2001 at Letitia Spit were simulated. The profile and shoreline changes were predicted reasonably well. Empirical model parameters were determined after a range of sensitivity and calibration testing. The new N-Line model showed its better performance compared to one-line models. It can handle various boundary conditions, especially bypass conditions. The N-Line model is not only capable of modelling planform variations but also cross-shore profile changes.
| Identifer | oai:union.ndltd.org:ADTP/215467 |
| Date | January 2006 |
| Creators | Dang, Van To, Civil & Environmental Engineering, Faculty of Engineering, UNSW |
| Publisher | Awarded by:University of New South Wales. School of Civil and Environmental Engineering |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Copyright Van To Dang, http://unsworks.unsw.edu.au/copyright |
Page generated in 0.0016 seconds