This paper presents a single-stage inverter with variable frequency modulation (VFM) based on LLC resonant converter. And LLC converter is a common topology of dc/dc conversion. LLC resonant converter can achieve high efficiency and soft-switching performance. Since the dc gain curve of the single-resonant LLC converter is flat when the switching frequency is larger than the resonant frequency, namely fs>fr, an additional L-C series resonant branch is paralleled to the original resonant tank to introduce higher-order-harmonic resonant current and a zero-gain point to the gain curve. Higher-order-harmonics help to deliver power and the zero-gain point enlarges the gain range which improves output THD and reduces the switching frequency range.
A 1.2 kW prototype is built to demonstrate the performance of the proposed inverter. Zero-voltage-switching (ZVS) and zero-current-switching (ZCS) are achieved on the primary side and secondary side, respectively. And 97.3% efficiency and 2.17% voltage THD are achieved at full load condition, while 97.2% efficiency and 3.2% voltage THD are achieved at half load condition. / M.S. / The inverter is widely used to connect renewable energy into the grid by converting dc to ac waveform, like photovoltaic (PV) technology. Basically, the two-stage topology is usually used. The inverter would consist of two stages working in high frequency, the first stage is dc/dc converter which can regulate the input voltage to the desired bus voltage for the second stage, and the second stage is dc/ac converter. The first stage works at a specific switching frequency, so it can be designed to achieve higher efficiency in dc/dc conversion. The second stage also works at high switching frequency and converts dc to ac commonly by using SPWM which changes the duty cycle ratio in a sinusoidal pattern. The single-stage inverter only has one stage working in high frequency while the second stage works at twice line frequency. The first stage converts dc to rectified ac waveform and the second stage unfolds it to ac.
The topology of LLC resonant converter being applied for the first stage of the single-stage inverter has been proposed. This topology uses variable-frequency-modulation (VFM) which varying switching frequency on the primary side to output different voltage levels. And it achieves zero-voltage-switching (ZVS). However, LLC converter can hardly output very low voltage due to the flat voltage gain curve at high frequency. Also, LLC converter only transfers the fundamental harmonic component to the load. If the higher-order harmonic components help transfer power when the switching frequency equals the resonant frequency, the current shape will be more like a square wave and the peak of resonant current can be reduced.
This thesis proposes a topology that has two L-C resonant branches in parallel for the resonant tank in the converter. And the paralleled resonant branches produce a zero-gain frequency point into the gain curve so that the gain range is enlarged within the reduced switching frequency range and 3rd harmonic component of the resonant current helps to transfer power so that the rms value of resonant current can also be reduced.
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/109563 |
Date | January 2022 |
Creators | Jiao, Dong |
Contributors | Electrical and Computer Engineering, Lai, Jih-Sheng, Jia, Xiaoting, Dong, Dong |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Language | en_US |
Detected Language | English |
Type | Thesis |
Format | ETD, application/pdf, application/pdf |
Rights | Creative Commons Attribution 4.0 International, http://creativecommons.org/licenses/by/4.0/ |
Page generated in 0.0028 seconds