A skid steer loader is a machine used in construction for multiple tasks. Its small size and versatility makesit a use-full addition to any work site. The machine is driven by a combustion engine that in turn powers ahydraulic pump. This hydraulic fluid from the pump is then directed to either motor to propel the vehicle. Twospeed motors are used to allow high-speed operation. A problem present in the current design of the hydraulicsystem for a skid steer loader is its tendency to jerk when shifting speed at low temperatures. In an effort toidentify potential problems and rectify those, two models will be constructed in Simulink. One is a model ofthe whole system, where the pump and both motors are included as well as the machine itself. The other modelis designed to predict the system behaviour of one motor and a pump in a flywheel test rig. Also auxiliarycomponents are included in the models, including the two-speed shifting valve and pressure release valves. Bothmodels will predict the system behaviour from a set of input variables, including temperature, oil viscosity andgeometrical parameters. Improvements to the design where identified by analysing the simulation data. It wasfound that system performance could be enhanced by switching to an alternative notch shape of the two-speedshifting valve.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:ltu-87456 |
| Date | January 2021 |
| Creators | Nilsson, Oskar |
| Publisher | Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0021 seconds