Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2007. / The use of older and slower protocols has become increasingly difficult to justify due to
the rapid pace at which telecommunications are advancing. To keep up to date with the
latest technologies, the communications system must be designed to accommodate the
transparent insertion of new communications standards in all the stages of a system. The
system should, however, also remain compatible with the older standards so as not to
demand an upgrade of the older systems.
The concept of a software defined radio was introduced to overcome these problems. In
a software defined radio system, the functionality of the communications system is defined
in software, which removes the the need for alterations to the hardware during technology
upgrade. To maintain interoperatibilty, the system must be based on a standardised
architecture. This would further allow for enhanced scalability and provide a plug-andplay
feature for the components of the system.
In this thesis, generic signal processing software components are developed to illustrate
the creation of a basic software modem that can be parameterised to comply fully, or
partially, to various standards.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:sun/oai:scholar.sun.ac.za:10019.1/1985 |
| Date | 03 1900 |
| Creators | Smuts, Matthys |
| Contributors | Van Rooyen, G-J., University of Stellenbosch. Faculty of Engineering. Dept. of Electrical and Electronic Engineering. |
| Publisher | Stellenbosch : University of Stellenbosch |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | 1008953 bytes, application/pdf |
| Rights | University of Stellenbosch |
Page generated in 0.0014 seconds