Unsaturated hydraulic conductivity was measured using four different methods. Tension permeameters were used to measure unsaturated hydraulic conductivity in the field, using a single disc method, which depends on the measurements of sorptivity, steady state flow rate, initial and final water content (White and Perroux, 1987, 1989). Also, a double disc method was used which utilizes Wooding's (1968) equation for two different disc radii at the same tension for steady state flow rates. Undisturbed and disturbed soil cores were used to measure unsaturated hydraulic conductivity in the lab, using water retention curves with van Genuchten's equations. There were no significant differences in the mean of hydraulic conductivity between single and double disc methods in all the tensions used (0, 5, 10 and 15 cm). There were significant differences between the field methods and undisturbed soil cores in zero cm tension, and disturbed soil cores in 10 and 15 cm tension. The effect of land preparation on the unsaturated hydraulic conductivity was studied using the double disc method. Tilling has significant effects on the unsaturated hydraulic conductivity at all tensions used. The spatial variation of unsaturated hydraulic conductivity and steady state flow in different tensions using the double disc method was studied. We found exponential variogram models for unsaturated hydraulic conductivity at 5, 10 and 15 cm tensions and a random model for zero cm tension. Also, exponential models were best fitted for steady state flow corresponding to pores radii of 0.03 - 0.015 cm, 0.015 - 0.010 cm and steady state flow at 10 cm tension. A Michaelis-Menton model was used for steady state flow at 5 cm and 15 cm tension. Disc permeameters were also used to add 5 cm depth of water, bromide and dye solution at 0, 5, 10 and 15 cm tensions with three replicates. A comparison was made between field data and simulated model under the same boundary and initial conditions as in the field. Results showed that the water and bromide move deeper than the prediction of the simulated model in all tensions used. The differences were larger between simulated model and field data for both water and bromide concentrations in the lower tension and smaller in the higher tension as a result of elimination of some preferential flow paths. An equation was developed for cumulative infiltration valid for both small and large time. The parameters calculated using the developed equation closely matched the measured infiltration, and fit better than a three term series similar to the Philip equation for one-dimensional flow.
Identifer | oai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/191170 |
Date | January 1991 |
Creators | Hussen, Akif Ali,1957- |
Contributors | Warrick, Arthur W., Huete, Alfredo R., Matthias, Allan D. |
Publisher | The University of Arizona. |
Source Sets | University of Arizona |
Language | English |
Detected Language | English |
Type | Dissertation-Reproduction (electronic), text |
Rights | Copyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author. |
Page generated in 0.0016 seconds