A brief analysis of the nonresonant-coupled parallel resonant converter is performed. The converter is modeled and a reference classical analog controller is designed and simulated. Infrastructure required for digital control of the converter (including anti-aliasing filters and a modulator) is designed and a classical digital controller is designed and simulated, yielding a ~30% degradation in control bandwidth at the worst-case operating point as compared with the analog controller. Based on the strong relationship observed between low-frequency converter gain and operating point, a gain-scheduled digital controller is proposed, designed, and simulated, showing 4:1 improved worst-case control bandwidth as compared with the analog controller. A complete prototype is designed and built which experimentally validates the results of the gain-scheduled controller simulation with good correlation. The three approaches that were investigated are compared and conclusions are drawn. Suggestions for further research are presented. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/35934 |
| Date | 15 January 2011 |
| Creators | Vulovic, Marko |
| Contributors | Electrical and Computer Engineering, Boroyevich, Dushan, Mattavelli, Paolo, Lee, Fred C. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | Vulovic_M_T_2010.pdf |
Page generated in 0.0019 seconds