The work presented in this thesis was conducted at Uppsala University and at Swerim AB. The study aims to broaden the knowledge about the corrosion of additively manufactured bioresorbable alloy WE43 in humanlike conditions for future applications. Biodegradable metal implants are implants meant to stay in the body and support the wounded bone for a certain time period, and then degrade as new, healthy bone forms in its place. Magnesium alloys have properties that are desired for these kind of implants as it is biodegradable, non-toxic and matches the mechanical properties of bone. Furthermore, magnesium alloy WE43, containing yttrium, neodymium and zirconium, already exist on the market as a powder extruded screw that treats Hallux valgus, thus proves the alloys compatibility as a bioresorbable implant. However, in order to optimize implants for specific situations, additive manufacturing can be a powerful tool. By utilizing the advantages of additive manufacturing, patient specific, complex designs implant can be manufactured rapidly in order to be used in a patient. On the other hand, additive manufacturing is a complex method with many aspects affecting the outcome. Therefore it is important to study the influence that different parameters have on the material's properties, especially the corrosion properties. This thesis aims to study different power settings on the laser in the manufacturing process and what effect it has on the microstructure as well as the corrosion properties of as built WE43 samples. Samples of three different parameters settings were manufactured with a Powder Bed Fusion-Laser Beam 3Dprinter. These samples were analyzed regarding surface roughness and microstructure with Light Optical Microscope, Scanning Electron Microscope, Energy Dispersive Spectroscopy, Electron Backscatter Diffraction and Alicona InfiniteFocus. Furthermore, the corrosion properties of the samples were investigated by collecting and measuring hydrogen gas that is released during the corrosion process. In addition, the electrolyte were examined regarding the change in ion concentration and electrochemical tests were performed. It was found that the samples did not differ substantially in microstructure as all three parameter settings exhibited a matrix of magnesium and precipitates of alloying elements. However, the sample manufactured at the lowest energy density had pores incorporated in the bulk. Despite the porous bulk this sample performed best in the immersion tests and exhibited the lowest corrosion rate over 28 days. The reason for this behavior is not determined, however possible causes are discussed and further studies are recommended.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:uu-448525 |
Date | January 2021 |
Creators | Wahman, Clarence |
Publisher | Uppsala universitet, Tillämpad materialvetenskap |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Relation | UPTEC K, 1650-8297 ; 21048 |
Page generated in 0.0021 seconds