Return to search

Modelling and simulation of paper structure development

A numerical tool has been developed for particle-level simulations of fibre suspension flows, particularly forming of the fibre network structure of paper sheets in the paper machine. The model considers inert fibres of various equilibrium shapes, and finite stiffness, interacting with each other through normal, frictional, and lubrication forces, and with the surrounding fluid medium through hydrodynamic forces. Fibre–fluid interactions in the non-creeping flow regime are taken into account, and the two-way coupling between the solids and the fluid phases is included by enforcing momentum conservation between phases. The incompressible three-dimensional Navier–Stokes equations are employed tomodel themotion of the fluid medium. The validity of the model has been tested by comparing simulation results with experimental data from the literature. It was demonstrated that the model predicts well the motion of isolated fibres in shear flow over a wide range of fibre flexibilities. It was also shown that the model predicts details of the orientation distribution of   multiple, straight, rigid fibres in a sheared suspension. Furthermore, model predictions of the shear viscosity and first normal stress difference were in fair agreement with experimental data found in the literature. Since the model is based solely on first principles physics, quantitative predictions could be made without any parameter fitting.   Based on these validations, a series of simulations have been performed to investigate the basic mechanisms responsible for the development of the stress tensor components for monodispersed, non-Brownian fibres suspended in a Newtonian fluid in shear flow. The effects of fibre aspect ratio, concentration, and inter-particle friction, as well as the tendency of fibre agglomeration, were examined in the nonconcentrated regimes. For the case of well dispersed suspensions, semi-empirical relationships were found between the aforementioned fibre suspension properties, and the steady state apparent shear viscosity, and the first/second normal stress differences.   Finally, simulations have been conducted for the development of paper structures in the forming section of the paper machine. The conditions used for the simulations were retrieved from pilot-scale forming trial data in the literature, and from real pulp fibre analyses. Dewatering was simulated by moving two forming fabrics toward each other through a fibre suspension. Effects of the jet-to-wire speed difference on the fibre orientation anisotropy, the mass density distribution, and three-dimensionality of the fibre network, were investigated. Simulation results showed that the model captures well the essential features of the forming effects on these paper structure parameters, and also posed newquestions on the conventional wisdom of the forming mechanics.

Identiferoai:union.ndltd.org:UPSALLA1/oai:DiVA.org:miun-7003
Date January 2008
CreatorsLindström, Stefan
PublisherMittuniversitetet, Institutionen för naturvetenskap, teknik och matematik, Sundsvall : Department of Natural Sciences, Engineering and Mathematics, Mid Sweden University
Source SetsDiVA Archive at Upsalla University
LanguageEnglish
Detected LanguageEnglish
TypeDoctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text
Formatapplication/pdf
Rightsinfo:eu-repo/semantics/openAccess
RelationMid Sweden University doctoral thesis, 1652-893X ; 60

Page generated in 0.0028 seconds