This project was performed together with ÅF Industry AB in Trollhättan, Sweden. ÅF’s expertise in Trollhättan is oriented towards the automotive industry. It was conducted within the section of CAE and safety where they, for instance, dimension bolt joints in the cars. Bolt joints play an important role in the automotive industry. Slip critical bolt joints are used widely throughout the vehicles. With lack of good test data, the bolt joints need to be dimensioned conservatively. This may lead to that bolt joints are over-dimensioned, adding more mass to the car. On the contrary, the availability of reliable test data enables designers to optimize joint dimensions to achieve a safe design with minimized mass. A mechanical testing configuration has been designed as well as a testing procedure for a test to determine the static friction value between mating surfaces in bolt joints. The testing configuration has been used to perform tests to find the static friction coefficient in different materials. The study contains varied combinations of steel, aluminium and ED-Coated steel. The study resulted in tables with levels of probability. The developed test configuration is robust and relatively simple to use and is recommended for further use. For improved statistical significance, it was noted that more samples should be used than was used in this study. The aluminium has a smoother surface finish and that could be the reason why its coefficient of friction is lower than steel. It is therefore considered important to also include surface roughness when presenting coefficient of friction results.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kau-55223 |
Date | January 2017 |
Creators | Lång, Marcus |
Publisher | Karlstads universitet |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0014 seconds