Return to search

Nanoscale Thermal Processing Using a Heated Atomic Force Microscope Tip

This dissertation aims to advance the current state of use of silicon atomic force microscope (AFM) cantilevers with integrated heaters. To this end, the research consists of two primary thrusts - demonstrating new applications for the cantilevers, and advancing the current state of understanding of their thermal and mechanical behavior to enable further applications. Among new applications, two are described. In the first application, the cantilevers are used for nanoscale material deposition, using heat to modulate the delivery of material from the nanoscale tip. In the second application, the cantilever performs thermal analysis with nanoscale spatial resolution, enabling thermal characterization of near surface and composite interphase regions that cannot be measured with bulk analysis techniques. The second thrust of the research seeks to address fundamental questions concerning the precision use of heated cantilevers. Efforts to this end include characterizing the mechanical, electrical, and thermal behavior of the cantilevers, and optimizing calibration methodology. A technique is developed for calibrating the cantilever spring constant while operating at elevated temperature. Finally, an analytical model is developed for the heat flow in the cantilever tip and relevant dimensionless numbers that govern the relative importance of the various components of the thermal environment are identified. The dimensionless numbers permit exploration of the sensitivity of the tip-substrate interface temperature to the environmental conditions.

Identiferoai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/14512
Date02 April 2007
CreatorsNelson, Brent A.
PublisherGeorgia Institute of Technology
Source SetsGeorgia Tech Electronic Thesis and Dissertation Archive
Detected LanguageEnglish
TypeDissertation

Page generated in 0.002 seconds