Additive manufacturing has shown the ability to produce highly complex geometries that are not easily manufactured through traditional means. However, the implications of building these complex geometries regarding thermal history requires more attention. AM process simulations have proven to be computationally expensive and require large amounts of pre-processing to execute. This thesis will start with a review of additive manufacturing along with current modeling efforts. Then, the development of a pre-processing tool for finite element simulations of these processes is presented. It is shown that the pre-processing tool significantly decreases the total time-to-simulation by removing manual steps. Finally, a study using this tool is conducted to analyze the thermal histories of a cube and a cylinder with two different scan strategies and explore differences in resulting thermal history. It is shown that less temperature fluctuations and a lower final temperature result from an offset scan strategy and a cylindrical geometry.
| Identifer | oai:union.ndltd.org:MSSTATE/oai:scholarsjunction.msstate.edu:td-1187 |
| Date | 13 December 2019 |
| Creators | Furr, William |
| Publisher | Scholars Junction |
| Source Sets | Mississippi State University |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | Theses and Dissertations |
Page generated in 0.0021 seconds