There is little doubt that moisture is a very important factor in relation to material durability. The need for tools to assist in the better understanding and systematic evaluation of moisture movement with the view of incorporating the results within the overall framework of the defect investigation, quality control, and long-term monitoring of moisture, have led to the development of various moisture monitoring and predicting techniques. With the purpose of helping to harmonise the interests in this field, this thesis addresses three major issues in the area of wood moisture. Various studies carried out have been shown that there are substantial discrepancies between specific timber species and published charts for equilibrium moisture content. One of the main objectives of this research was to focus on establishing the equilibrium moisture content for a range of relative humidity and temperature on an individual basis, for twenty commercially important species used in the United Kingdom. The rationale for carrying out the project, the results from the initial trial and the mainstream experiment, the hardware and methodology developed are provided. To meet the requirements of long term accurate and reliable moisture monitoring and to provide comprehensive moisture information, a new type of moisture sensor and related measurement system were developed. The methodology of system design and test procedures are described, emphasising the anti-polarisation method, noise rejection and contact resistance reduction techniques employed. Other aspects of the electrical performance of timber were also investigated. Results from a case study showed that the sensor developed can operate in the critical range of relative humidity with sensitive and accuracy. In the final part of the project, two moisture transport models were developed. Mathematical prediction models in both one dimension and three dimensions are presented for simulating the adsorption and desorption processes in wood. Comparisons are made against long-term experimental data for the one dimensional model. The finite differential method was employed to solve the mathematical expressions developed, resulting in accurate prediction of concentration-driven moisture flows. Investigations were also carried out into the moisture diffusion coefficient and moisture behaviour in the three principal wood directions by using the sensor developed which provided isothermal real-time continuous data.
Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:271065 |
Date | January 1999 |
Creators | Dai, Guangya |
Publisher | University of Bedfordshire |
Source Sets | Ethos UK |
Detected Language | English |
Type | Electronic Thesis or Dissertation |
Source | http://hdl.handle.net/10547/337409 |
Page generated in 0.202 seconds