Focused Ion Beam (FIB) has several advantages such as high sensitivity, high material removal rates, low forward scattering and directing fabrication. Without any etched mask, processing time can be reduced. Pyrex glass etched by FIB is used for fast fabrication of 3-D submicron structure mold. In this study, glass is used as substrate. The UV-cured resin that spin-coated onto a mold has 3-D structure patterns. 3-D structure patterns are transferred on the plate to investigate the effects of parameters of UV cured, pressure and exposure time on the occurrence of defects. The relationship of these processing parameters for the imprinting process is also realized. Besides, the material property of UV-cured resin is investigated. UV-Cured resin is investigated by thermogravimetric Analysis (TGA) to measure the degradation temperature (Td). The hardness and modulus of UV-Cured resin was measured by nanoindentation to realize deformed ability of material for the imprinting process. Moreover, the contact angle of Pyrex glass is measured to investigate its surface quality for the imprint process.
| Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0214107-171701 |
| Date | 14 February 2007 |
| Creators | Yang, Shih-yi |
| Contributors | Chien-Hsiang Chao, Cheng-Tang Pan, Shyue-Jian Wu |
| Publisher | NSYSU |
| Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
| Language | Cholon |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0214107-171701 |
| Rights | not_available, Copyright information available at source archive |
Page generated in 0.0019 seconds